Stainless Steel Floor Drains
for Bathrooms, Showers, Kitchens

To install a floor drain, follow these steps:

• Cut the floor opening to the desired size and location.
• Install the rough-in flange and secure it to the floor using screws.
• Install the trap adapter and connect it to the drain pipe.
• Place the strainer body into the rough-in flange.
• Secure the strainer body to the rough-in flange with screws.
• Install the grate and secure it to the strainer body.
• Test the drain for proper flow and leaks.

Note: Always refer to the manufacturer’s instructions and local plumbing codes for specific installation requirements and regulations.

To clean a bathroom floor drain, follow these steps:

• Remove any visible debris or hair from the drain.
• Mix equal parts baking soda and white vinegar.
• Pour the mixture into the drain and let it sit for 5 minutes.
• Flush the drain with boiling water.
• Repeat the process if necessary.

Alternatively, you can use a plunger or a snake tool to remove clogs.

To unclog a floor drain, try the following steps:

• Boiling water: Pour a pot of boiling water down the drain to soften and break up any blockages.
• Plunger: Use a plunger to create suction and loosen the clog.
• Vinegar and baking soda: Mix 1/3 cup of baking soda with 1/3 cup of vinegar, then pour down the drain. Wait for 10-15 minutes, then flush with hot water.
• Snake: Use a plumbing snake to remove the clog from the drain physically.

If these steps do not work, consider using a chemical drain cleaner or calling a plumber.